Launched by Nature Unleashed in July, 2014. As depicted by the picture of lightning striking the ocean, Anolyte uses electrolyzed anolyte water, which is salt water that’s been electrically charged, thereby producing hypochlorous acid. The brand includes: Anolyte C™ (Cleanser), Anolyte F™ (First Aid), Anolyte H™ (Hand), Anolyte S™ (Skin & Body) and Anolyte A™ (Animal), as all natural, non-toxic, safe alternatives to cleansing, first aid and personal care.
Three (3) 32oz empty mixing spray bottles will ship with your purchase of one (1) 32 oz Anolyte C™ at no extra charge. Per instructions on the mixing bottles, water is mixed with 8 oz of Anolyte C™ in each mixing bottle, producing 4 – 32oz bottles, which equates to less than $8 per bottle. This is an unparalleled cost savings as this one product, Anolyte C™, can replace all cleansing and deodorizing products as a safe, non-toxic alternative to harmful chemicals currently on the market.
Our Anolyte F™ is our “All-in-one first aid solution… Naturally! As a Food & Drug Administration (FDA) 510(k) medical device, it is a safe, one-step, easy to use, no mix, no dilution, no rinse solution that mechanically removes debris and germs from the wound bed and deactivates pathogens in solution,* without harming healthy tissue and contains no alcohol or steroids that are common in and around. Recommended to use in the management of cleaning, irrigating and debriding of minor skin abrasions, lacerations, burns, irritations, cuts and intact skin. Its pH is in the physiologically acceptable range of your skin and is also shelf-stable…. And most importantly, no pain or sting when applied!
*Reduction in microbial growth in solution has not shown to correlate with a reduction of infection in patients. No clinical studies have been performed to evaluate reduction of infection.
Anolyte F™ (First Aid) has been through many efficacy and compatibility tests required by the FDA for human medical device technology. It is proven to be effective and very safe*. Tests on MRSA, VRE, E.coli, and other fungi and bacterium, have shown over a 5 log reduction on these organisms.
*Anolyte F™ passed the USP 51 test a required test by the FDA. The tested bacteria and fungi of the USP 51 test are just as important as the more recognizable CDC super bugs. Reduction in microbial growth in solution has not shown to correlate with a reduction of infection in patients. No clinical studies have been performed to evaluate reduction of infection.
Yes, Anolyte F™ (First Aid) is safe for use with other wound care products; however, we recommend consulting a physician. Anolyte F™ has no known negative contraindications and no known negative reactions with other drug products.
Yes and No. Chlorine can be a very dangerous chemical, but that can be said about any chemical. Hydrogen, the most abundant element in the universe, is a dangerous chemical when used in Air Ships. Without chlorine, life itself is not possible. Our blood contains NaCl, salt. Our stomach produce HCl, stomach acid, many of the compounds made by our bodies contain chlorine, like HOCl, Hypochlorous Acid.
No. Anolyte C™ (Cleanser) is very different from bleach, as it is strong enough for your toilet brush, yet non-toxic and safe enough for your toothbrush. Our principal ingredient, Hypochlorous Acid, is a different oxychlorine species that is dissimilar from sodium hypochlorite (bleach). Anolyte products have no toxic vapors that cause pulmonary issues and are non-irritating. This is not the case for bleach and other traditional chemical biocides. Our Anolyte products pH are in a neutral range just like the pH of the dermal layer of all humans. Bleach solution or “Dakin’s Solution” are of a very high pH, are not shelf stable, have to be used quickly and rinsed after use. No rinsing necessary with Anolyte products.
Anolyte C™ is fine on high quality glass, like iPhones, some eyeglasses and TV screens. It may add a haze to lesser quality glass.
The key principle ingredient, hypochlorous acid, is a naturally occurring molecule synthesized from an electrolyzed solution of water and salt. It is not a bleach or toxin. Anolyte products do not contain alcohol, antibiotic, or steroids.
Anolyte can be applied in the presence of humans and animals. In fact, hypochlorous acid is produced by the human body to fight invading bacteria and viruses.
Yes, Hypochlorous Acid is the principal ingredient in our Anolyte product line. The levels of each ingredient is relative to the beneficial usage. In keeping our Customers’ best interest in mind, we label each product for its specific use, so the appropriate product can be placed throughout their homes for convenience and easy access.
When you have a request for Anolyte products in large volume, i.e. drums or totes, please email specific needs and request pricing from Nature Unleashed at email@example.com.
Anolyte C™ is fine for cleaning household appliances as these have an enamel finish or are a higher grade of stainless steel; however, in the same way that the oxidation process kills pathogens, it may speed up the oxidation process and tarnish ferrous (iron-like) metals.
Anolyte C™ is effective at removing mold stains.
For inside the home, e.g. frontload washers, bathroom showers & tiles, basements, moist places, etc., spray Anolyte C™ (full strength) on mold stains and wipe away. Repeat as needed, until stains removed.
For outside the home, e.g. on siding, lawn furniture, boats, etc., spray Anolyte C™ (full strength) on mold stains. For best results, use a power washer to remove debris.
The key principle ingredient, hypochlorous acid, is a naturally occurring molecule synthesized from an electrolyzed solution of water and salt. It is not a bleach or toxin. Anolyte products do not contain alcohol, antibiotic, or steroids. Our EPA registered Anolyte D product will kill labeled viruses and bacterium.
Consumers: If not answered on this website, email questions to firstname.lastname@example.org.
Customers: If not answered on this website, your Brand Partner is a great resource, and you can also email us at email@example.com.
Brand Partners: if not answered on this website, your Brand Partner Mentor, if applicable, is a great resource. You can also email your questions to firstname.lastname@example.org.
Yes! Anolyte C™ contains no harmful chemicals; therefore, it is safe around food and food prep surfaces.
EPA and FDA regulations state that our products cannot be ingested. Any other use that is not consistent with labeling is not suggested.
Absolutely. Using as often as desired will proactively help to create a safe and healthy environment for yourself and your loved ones, including your pets.
Anolyte C™: 12 months
Anolyte F™, Anolyte H™, Anolyte S™, Anolyte A™: 18 months.
Note: Read the product label for more details. We add no carcinogenic preservatives. Keep all Anolyte products out of direct sunlight and do not freeze. After use, keep the container sealed, as solution should only be mixed with water (tap and well water is fine).
From time to time, since Anolyte C™ is electrolyzed Anolyte water, you may feel something when pouring the Anolyte C™ into one of its mixing bottles, specifically when holding both bottles in hands while pouring. Envision static on a wool sock coming out of the dryer. It is not harmful and is a rare occurrence. Keep one bottle on the counter and hold the other while pouring, and you may skip this experience.
Although many have shared their success stories about using Anolyte C™ to remove stains from garments, upholstery, as well as carpet, not everything reacts the same to the powerful chemistry of Anolyte products, so it is important that you test on a small and less visible area first, just like you would with any other product you use for stain removal. Anolyte products are a ROS (Reactive Oxygen Species), which is referring to the hypochlorous acid ingredient; therefore it “reacts”. This is why we discourage mixing with other compounds.
After using Anolyte F™ to help soothe and facilitate healing of minor scrapes, cuts, bites or abrasions, the wound may brighten due to the transfer of oxygen into the skin. Capillaries are close to the skin’s surface when there’s a wound, and Anolyte F™ is hypotonic, so it absorbs into the skin, transferring oxygen, which may brighten the compromised area.